Victron Energy
Victron MultiPlus 12/1200/50-16 120V Inverter/Charger
Victron MultiPlus 12/1200/50-16 120V Inverter/Charger
Couldn't load pickup availability
The Victron MultiPlus 12/1200/50-16 combines a pure sine wave inverter, powerful 50A battery charger, and automatic AC transfer switch into one compact, dependable unit. It's an excellent choice for RVs, camper vans, truck campers, boats, service vehicles, and smaller off-grid systems.
Enjoy reliable 120V household power from your 12V battery bank, automatically switch to shore or generator power when available, and recharge your batteries without a separate AC charger. With 1200VA inverter capacity, 1000W continuous output, and 2400W peak power, the MultiPlus is well suited to everyday electronics, lighting, entertainment equipment, and smaller appliances.
Built-in PowerControl and PowerAssist help manage limited shore or generator power, while Victron's configurable charging technology makes this MultiPlus particularly attractive for LiFePO₄ battery upgrades and replacing older RV converter/chargers.
- Three Devices in One: Pure sine wave inverter, 50A battery charger, and automatic AC transfer switch in one compact unit.
- Reliable 120V Power: 1000W continuous output with up to 2400W peak power for compatible appliances and electronics.
- Automatic Shore Power Switching: Seamlessly transitions between battery power and incoming AC without manual intervention.
- Fast 50A Battery Charging: Quickly replenish your 12V battery bank from shore power or a generator.
- Smart Power Management: PowerControl and PowerAssist help make the most of limited AC supplies without overloading your shore-power connection.
- Lithium Ready & Expandable: Configurable LiFePO₄ charging with VE.Bus connectivity for remote controls, Bluetooth accessories, and Victron GX monitoring systems.
The powerful 50A battery charger can rapidly recharge your batteries, while adjustable AC input limits help prevent overloading smaller shore-power connections and generators.
Smart PowerControl automatically reduces battery charging when other AC loads need power, keeping total demand within your configured input limit.
Camper Vans & Van Life: Run laptops, televisions, lighting, and other everyday 120V electronics from your house battery. When you plug into shore power, the MultiPlus automatically transfers your connected loads to the incoming supply and can begin recharging your batteries.
RVs, Truck Campers & Lithium Upgrades: Upgrading from lead-acid to LiFePO₄ batteries? The MultiPlus can replace your existing converter/charger, providing configurable 50A lithium battery charging while adding a 1000W pure sine wave inverter and automatic shore-power transfer. It's a convenient way to modernize your RV's electrical system with one integrated unit.
Service Trucks & Mobile Work Trailers: Keep cordless tool batteries charged and your workspace illuminated throughout the day using an onboard battery bank. At the end of the workday, simply plug into shore power and let the 50A charger replenish your batteries overnight, ready for the next job.
Boats & Marine Applications: Keep compatible AC equipment powered from your house battery while away from the dock. When shore power becomes available, the automatic transfer switch takes over and the integrated charger can replenish your batteries.
Off-Grid Cabins & Backup Power: Combine a 12V battery bank with a compact inverter and charger. The MultiPlus supplies everyday AC loads from your batteries and automatically uses generator or utility power when available.
This replaces your RV's outdated converter/charger with a configurable 50A lithium-compatible charger, while adding a 1000W pure sine wave inverter and automatic shore-power transfer in one compact unit.
One of the MultiPlus's biggest advantages is its ability to intelligently manage incoming AC power. This is particularly useful when your RV, cabin, or work trailer is connected to a smaller generator, campground hookup, or household outlet.
With PowerControl, the MultiPlus monitors incoming AC demand and automatically reduces battery charging when necessary, helping keep total current draw within the configured AC input limit.
PowerAssist takes this a step further. When enabled and properly configured, the MultiPlus can supplement a limited incoming AC supply using power from the battery, helping support temporary demand above the available shore or generator power.
Add a Victron Digital Multi Control GX to switch your MultiPlus ON, OFF, or into Charger Only mode from a convenient location. Built-in status indicators let you check inverter operation and charging at a glance.
| Victron Part Number | PMP122120100 |
| Nominal Battery Voltage | 12V DC |
| DC Input Voltage Range | 9.5–17V DC |
| AC Output Voltage | 120V AC ±2% |
| AC Output Frequency | 60Hz ±0.1% |
| Inverter Waveform | Pure Sine Wave |
| Continuous Output (25°C / 77°F) | 1200VA / 1000W |
| Continuous Output (40°C / 104°F) | 900W |
| Peak Output Power | 2400W |
| Maximum Efficiency | 93% |
| No-Load Consumption | 10W |
| Search Mode Consumption | 3W |
| Maximum Battery Charging Current | 50A |
| Starter Battery Charge Output | 1A |
| AC Input Voltage Range | 95–140V AC |
| AC Input Frequency Range | 55–65Hz |
| AC Transfer Switch Rating | 16A |
| Transfer Time | <20ms |
| PowerControl / PowerAssist | Yes / Yes |
| Communication Interface | VE.Bus (RJ45) |
| AC Connections | G-ST18i Connectors |
| DC Battery Connection | 35 mm² Terminals |
| Cooling | Fan Assisted |
| Ingress Protection | IP21 |
| Operating Temperature | -40°C to +65°C (-40°F to +149°F) |
| Dimensions (H × W × D) | 406 × 250 × 100 mm (16.0 × 9.8 × 3.9") |
| Weight | 8.2 kg (18.1 lb) |
The MultiPlus supports configurable lithium charging, but charge voltages, current limits, and low-voltage protection must be configured for your battery before use. Factory charging settings should not be assumed suitable for LiFePO₄.
The MultiPlus can also become part of a more comprehensive Victron monitoring and control system. Add a Cerbo GX with a GX Touch display to view inverter operation, AC power, battery information, and other connected Victron equipment from one convenient touchscreen.
It's a particularly useful upgrade when combining your MultiPlus with a Victron SmartShunt, SmartSolar MPPT controller, or other supported system components.
GX Touch displays require a compatible Cerbo GX, sold separately.
Is this a 1200W inverter or a 1000W inverter?
The MultiPlus is rated at 1200VA and 1000W continuous output at 25°C (77°F). VA represents apparent power, while watts represent actual power delivered to the load.
The unit also offers up to 2400W peak power for brief starting demands. This can be useful for compatible equipment with a short startup surge.
Continuous output decreases as operating temperature increases. For example, Victron rates this model at 900W continuous at 40°C (104°F). Size your system based on the actual loads you intend to operate.
Can I run a microwave, coffee maker, or other appliances?
Yes, provided the appliance is within the inverter's power rating. The MultiPlus delivers 1000W continuous output at 25°C (77°F), making it suitable for many everyday electronics and smaller household appliances.
Travel-sized and low-wattage appliances are particularly well suited to smaller inverter systems. Compact coffee makers, low-wattage microwaves, travel kettles, and other RV-friendly appliances may be compatible when their actual power consumption stays within the inverter's limits.
Always check the appliance's electrical input wattage and starting requirements. Microwave cooking-power ratings are not the same as their electrical input, and the MultiPlus's 2400W peak rating is intended for brief surges rather than continuous use.
Does the MultiPlus automatically switch between shore power and battery power?
Yes! The MultiPlus includes an automatic AC transfer switch. When acceptable shore or generator power is available, it can pass that power through to your connected AC loads.
If the incoming AC supply is disconnected or fails, the inverter automatically takes over and supplies power from the battery, provided the inverter is enabled and the battery has sufficient available energy.
Victron specifies a transfer time of less than 20 milliseconds, allowing many electronic devices to continue operating through the transition.
Can the MultiPlus replace my RV's existing converter/charger?
Yes! The MultiPlus can replace the battery-charging function of a traditional RV converter/charger, making it an excellent upgrade when switching from lead-acid to 12V LiFePO₄ batteries.
Unlike many older RV converters, the MultiPlus offers configurable charging voltages and current limits suitable for lithium batteries. It also adds a 1000W pure sine wave inverter and automatic AC transfer switching, giving you several useful upgrades in one integrated unit.
Installation note: The MultiPlus replaces the converter's charging function, but not necessarily the RV's 12V DC distribution panel. The existing converter must be properly disconnected or isolated, and the MultiPlus must be correctly integrated with the RV's AC and DC electrical systems.
Can I use this with a 12V LiFePO₄ battery?
Yes! The MultiPlus can be configured for compatible 12V LiFePO₄ batteries, including Sapphire Energy lithium batteries.
For many Sapphire 12V LiFePO₄ batteries, a recommended starting point is 14.2V absorption and 13.5V float. The maximum charging current must also be configured within the battery's permitted charging limits.
Low-voltage protection, charging behaviour, and temperature compensation must also be configured appropriately. Always follow the requirements of your specific battery and BMS.
How does PowerControl help with a small generator or shore-power connection?
PowerControl helps prevent overloading limited AC supplies. The MultiPlus monitors incoming AC demand and reduces battery charging when necessary to stay within the configured input current limit.
For example, when connected to a 15A household outlet, you can configure a suitable input limit to reduce the risk of overloading the circuit. The charger automatically adjusts its output as connected AC loads change.
PowerControl is particularly valuable when using smaller generators or shared electrical circuits, allowing the MultiPlus to prioritize connected AC equipment over battery charging.
What is PowerAssist, and how is it different from PowerControl?
PowerControl manages the available incoming AC power by reducing battery charging as needed to respect the configured input current limit.
PowerAssist can supplement a limited shore or generator supply with additional power from the battery when supported and properly configured. This is helpful when temporary demand exceeds the available incoming AC power.
PowerAssist does not increase the inverter's own power rating or the electrical capacity of your wiring and protective devices. All system components must be sized appropriately for the intended loads.
Does this MultiPlus have Bluetooth built in?
No, but Bluetooth can be added! The MultiPlus communicates using Victron's VE.Bus interface rather than built-in Bluetooth.
The optional Victron VE.Bus Smart Dongle (ASS030537010) adds Bluetooth connectivity through the VictronConnect app, allowing convenient local monitoring, operating-mode control, and supported AC input-current adjustments.
For more comprehensive system monitoring, a Cerbo GX with a GX Touch display can integrate your MultiPlus with compatible battery monitors, solar controllers, and other Victron equipment.
Does the MultiPlus need to be programmed for my battery?
Yes! The MultiPlus should be configured for your battery type before use. Different battery chemistries, including LiFePO₄, AGM, and flooded lead-acid, require different charging voltages, current limits, and protection settings. Factory settings may not be suitable for your battery.
Option 1 – Program It Yourself: Add a Victron MK3-USB Interface to connect your MultiPlus to a computer. This lets you configure charging settings, make future adjustments, perform diagnostics, and update firmware whenever needed. It's a handy accessory to keep with your system.
Option 2 – Let Sapphire Program It for You: We can configure your MultiPlus for your battery before shipping, so it arrives with the appropriate battery charging settings already programmed. A small programming service fee applies. Contact us before ordering to discuss your battery specifications and setup requirements.
Is the MultiPlus suitable for a complete RV electrical system?
Yes, for appropriately sized electrical systems. The MultiPlus is an excellent choice for camper vans, truck campers, smaller RVs, and travel trailers where a 1000W continuous inverter meets your power requirements.
It combines an inverter, battery charger, and automatic transfer switch into one unit, making it particularly attractive for LiFePO₄ battery upgrades. Proper AC/DC wiring, battery protection, and appropriately sized cables and fuses are still required.
Need more power? For larger appliances, higher-demand RV systems, and power tools, consider the Victron MultiPlus-II 12/3000. It provides 3000VA inverter capacity, 2400W continuous output, and up to 120A of battery charging.
Share
