Victron Energy
Victron VE.Bus Smart Dongle (Bluetooth)
Victron VE.Bus Smart Dongle (Bluetooth)
Couldn't load pickup availability
Add convenient Bluetooth monitoring and control to your compatible Victron MultiPlus, MultiPlus-II, Quattro, or other VE.Bus inverter/charger with the Victron VE.Bus Smart Dongle. Using the free VictronConnect app, you can check your system's operating status, view electrical information, and access supported controls directly from your smartphone or tablet.
Switch your inverter ON, OFF, or into Charger Only mode, and adjust your AC input current limit without walking over to the inverter or connecting a computer. It's particularly convenient for RVs, camper vans, boats, cabins, and off-grid systems where the inverter is installed out of sight.
The dongle also provides battery voltage and temperature sensing, helping compatible Victron equipment account for battery conditions. With support for VE.Smart Networking, it can share these measurements with other compatible Victron devices.
- Bluetooth for Your MultiPlus: Monitor compatible VE.Bus inverter/chargers directly through the VictronConnect app.
- Remote ON/OFF Control: Switch between ON, OFF, and Charger Only modes without accessing the inverter itself.
- Adjust Shore Power Limits: Change supported AC input current settings from your phone to match campground hookups, generators, and other available AC supplies.
- Live System Monitoring: View battery information, AC/DC operating data, inverter status, and supported warnings or alarms.
- Battery Voltage & Temperature Sensing: Provides measurements for compatible charging equipment and VE.Smart Networking.
- Simple Victron Integration: Connects through VE.Bus and works with compatible standalone and multi-unit inverter/charger installations.
RVs & Camper Vans: Check whether your MultiPlus is inverting, charging, or operating from shore power without opening an electrical compartment. Switch to Charger Only mode when needed, or adjust your AC input limit when arriving at a campground.
Boats & Marine Systems: Monitor your inverter/charger from the cabin using VictronConnect. Quickly check operating status, battery voltage, and supported system information without accessing equipment installed in a machinery compartment.
Off-Grid Cabins & Generators: Conveniently adjust the AC input current limit when operating from different generators or limited electrical supplies. Check charging and inverter operation from your phone while you're nearby.
Existing Victron Installations: Already have a compatible MultiPlus or Quattro without Bluetooth? The VE.Bus Smart Dongle adds convenient local monitoring and basic control without replacing your inverter or installing a complete GX monitoring system.
The dongle includes fused battery connection leads, but requires a straight-through RJ45 UTP cable, sold separately, to connect to your inverter's VE.Bus port.
In addition to wireless monitoring, the VE.Bus Smart Dongle can measure battery voltage and temperature. These measurements can help compatible charging equipment compensate for voltage differences between the charger and battery terminals.
For battery temperature measurements, the dongle can be mounted directly against the battery enclosure using its internal sensor. An optional external temperature sensor is also supported.
Through Victron VE.Smart Networking, the dongle can wirelessly share battery voltage and temperature measurements with compatible SmartSolar and other supported Victron equipment. This makes it a useful addition to systems with multiple charging sources.
| Victron Part Number | ASS030537010 |
| Communication Interface | VE.Bus (RJ45) |
| Wireless Communication | Bluetooth Smart (BLE) |
| Operating Voltage | 8–70V DC |
| Current Consumption (12V) | <9mA |
| Battery Voltage Sensing | Yes |
| Battery Temperature Sensing | Internal / Optional External |
| VE.Smart Networking | Supported |
| Status Indicators | Blue / Red LEDs |
| Operating Temperature | -20°C to +50°C (-4°F to +122°F) |
| Maximum Humidity | 95% Non-Condensing |
| Ingress Protection | IP20 |
| Enclosure Material | ABS Plastic |
The Bluetooth dongle handles everyday monitoring and basic controls. For battery charging settings, advanced configuration, and inverter firmware updates, use a Victron MK3-USB Interface.
Can I control my MultiPlus from my phone?
Yes! The VE.Bus Smart Dongle adds Bluetooth connectivity to compatible Victron inverter/chargers through the free VictronConnect app.
You can switch between ON, OFF, and Charger Only modes, view supported operating information, and adjust the AC input current limit without accessing the inverter directly.
Bluetooth provides local wireless access while you're within communication range. It does not provide internet-based remote monitoring on its own.
Can I change the AC input current limit using Bluetooth?
Yes! With a compatible inverter/charger and supported firmware, the VE.Bus Smart Dongle allows you to adjust the AC input current limit directly through VictronConnect.
This is particularly convenient when connecting an RV, boat, or off-grid system to different electrical supplies. You can adjust the limit to match a campground hookup, generator, or household outlet.
This is an operating adjustment, not a replacement for configuring your inverter's underlying settings. Victron requires compatible firmware for the current-limit control feature.
Can I use the Bluetooth dongle and Digital Multi Control GX together?
Yes, both can operate on the same compatible VE.Bus system. However, when a Digital Multi Control GX is connected, it takes priority over the dongle's inverter controls.
The Digital Multi Control GX handles ON/OFF/Charger Only switching and AC input current adjustments. The Bluetooth dongle continues to provide supported inverter/charger monitoring, battery measurements, and temperature sensing through VictronConnect.
If your inverter has only one VE.Bus port, an appropriate VE.Bus-compatible connection arrangement is needed to attach both devices. Check the applicable Victron installation instructions before connecting multiple accessories.
Is the RJ45 connection cable included?
No. A straight-through RJ45 UTP cable is required to connect the dongle to your inverter/charger's VE.Bus port and must be purchased separately.
The package includes the VE.Bus Smart Dongle, removable terminal block, and battery connection leads. The positive battery lead includes an inline fuse.
The dongle requires both the RJ45 VE.Bus connection and battery power connections for normal inverter monitoring and control. Choose an RJ45 cable length appropriate for your installation.
Can the dongle program my MultiPlus for lithium batteries?
No. The VE.Bus Smart Dongle provides convenient monitoring and basic operating controls, but does not provide full inverter/charger configuration or inverter firmware updates.
To configure LiFePO₄ charging voltages, maximum battery charging current, low-voltage settings, or other important inverter parameters, use a compatible Victron MK3-USB Interface with supported Victron configuration software.
Keeping an MK3-USB interface on hand is useful for future settings changes, diagnostics, and firmware maintenance.
Can this dongle monitor battery state of charge?
The VE.Bus Smart Dongle measures battery voltage and temperature and displays supported information reported by the connected inverter/charger.
Battery state of charge may be available when the connected Victron system provides that information, but the dongle is not a standalone shunt-based battery monitor.
For more accurate battery state-of-charge monitoring, especially in lithium systems, consider adding a Victron SmartShunt or another compatible shunt-based battery monitor.
What is VE.Smart Networking?
VE.Smart Networking allows compatible Victron devices to exchange selected battery measurements wirelessly over Bluetooth.
The VE.Bus Smart Dongle can transmit its battery voltage and temperature measurements to supported Victron charging equipment, such as compatible SmartSolar MPPT controllers.
This helps supported charging devices account for voltage differences and battery temperature when regulating their charging output. Available functions depend on the connected equipment and configuration.
What's the difference between the VE.Bus Smart Dongle and Cerbo GX?
The VE.Bus Smart Dongle is designed for convenient local Bluetooth monitoring and basic control of a compatible inverter/charger using VictronConnect.
A Cerbo GX provides much more comprehensive system integration, monitoring, and communication. It can combine supported inverter/charger, battery monitor, solar controller, and other Victron equipment information into one system.
Pairing the Cerbo GX with a GX Touch display adds a dedicated touchscreen interface. Compatible GX systems can also provide internet-based monitoring through Victron's VRM platform.
Share
