Victron GX Touch Display for Cerbo GX

A Dedicated Touchscreen for Your Victron System

Add a clean, dedicated control panel to your Victron system with the Victron GX Touch 50 or GX Touch 70. Designed specifically for the Cerbo GX family, these slim touchscreen displays provide an immediate overview of battery status, solar production, AC loads, inverter operation, generator status, tank levels and other connected equipment.

Choose the compact 5-inch GX Touch 50 where installation space is limited, or the larger, higher-resolution 7-inch GX Touch 70 for improved visibility and easier operation. Both displays provide the same GX system functions and connect directly to a compatible Cerbo GX using their permanently attached two-metre HDMI and USB cable.

No separate power supply or complicated display configuration is required. Once connected, the GX Touch automatically displays the Cerbo GX system interface and provides convenient local monitoring and control without requiring a phone, tablet or computer.

Why You'll Love It

• Instant overview of your complete connected Victron system
• Choice of compact 5-inch or larger 7-inch touchscreen
• Direct HDMI and USB connection to the Cerbo GX
• Permanently attached two-metre connection cable
• No separate display power supply required
• Super-slim design for clean dashboard installation
• IP54-rated front-mounted display without connectors
• Current-production units include a protective display cover

Choose Your Display Size

The GX Touch 50 and GX Touch 70 provide the same system-monitoring and control functions. The main differences are the physical screen size, display resolution and overall dimensions.

See Your Complete System at a Glance

The GX Touch displays the system information collected and coordinated by the connected Cerbo GX. Available information depends on the equipment installed in your system, but can include:

• Battery voltage, current and state of charge
• Solar production and charge-controller status
• AC input, inverter output and connected loads
• Inverter/charger operating mode and alarms
• Generator status and manual start or stop controls
• Tank levels and temperature-sensor readings
• DC-DC charger and managed-battery information
• System notifications, warnings and operating history

Supported system settings can also be accessed directly through the touchscreen, allowing quick local adjustments without opening an app or connecting a separate computer.

Simple HDMI & USB Connection

The GX Touch includes a permanently attached two-metre combined connection cable. The HDMI connector carries the display signal, while the USB connector supplies power and provides the touchscreen interface.

Connect both plugs to the appropriate ports on the Cerbo GX and the display automatically loads the GX system interface. No separate AC adapter, DC power connection or communication cable is required.

Clean Front-Mount Installation

The standard GX Touch 50 and GX Touch 70 mount to the front of a dashboard or control panel using the included mounting accessories. Their slim design provides a clean finished appearance without requiring the entire display body to be recessed into the mounting surface.

An optional GX Touch Wall Mount is available for installations where the display cannot be mounted through a dashboard. A separate adapter is also available for installing the GX Touch 50 over an existing Color Control GX cut-out.

Designed for RV, Marine & Off-Grid Systems

The standard GX Touch display is rated IP54 without its connectors, helping protect the front-mounted display against dust and splashing water. A protective cover is included with current-production units to help shield the screen from UV exposure during prolonged sunlight.

The display and its rear connections should still be installed in an appropriate location. The HDMI and USB connectors are not included in the IP54 rating and must be protected against moisture, condensation and physical damage.

What's Included

• Victron GX Touch 50 or GX Touch 70 display, depending on selected variant
• Permanently attached two-metre HDMI and USB connection cable
• Front-mount bracket frames and installation hardware
• Protective display cover with current-production units

Cerbo GX communication centres, wall-mount adapters, CCGX cut-out adapters and other system equipment are sold separately.

Applications

• RV and motorhome electrical systems
• Camper vans and vehicle conversions
• Marine and yacht power systems
• Off-grid homes and cabins
• Mobile workstations and service vehicles
• Remote communications sites
• Solar and battery backup systems
• Hybrid solar and generator installations
• Professionally integrated Victron systems

Product Specifications