Sapphire Energy
Solar MC4 to XT60i Portable Power Station Extension Adapter Cable
Solar MC4 to XT60i Portable Power Station Extension Adapter Cable
Couldn't load pickup availability
MC4 to XT60i Solar Charging Cable - 10AWG
This high-power MC4 to XT60i solar charging cable connects standard solar panels to portable power stations using an XT60i or XT60-style solar input. Built with heavy 10AWG pure copper wire, it helps reduce voltage drop and supports stronger solar charging performance compared with smaller adapter cables.
The 10 ft / 3 m cable length gives you extra flexibility to place your solar panel in better sunlight while keeping your power station shaded, protected, or easier to access. It is commonly used with portable power stations from brands such as EcoFlow, Bluetti, and many others that use XT60-style solar input ports.
This cable is a great match for our Made-in-Canada Lumera 200W Folding Solar Kit when connecting to compatible XT60i / XT60 power stations.
Why You’ll Love It
- Heavy 10AWG pure copper cable helps reduce voltage drop and charging losses
- XT60i connector supports high-power solar input on compatible power stations
- Standard MC4 solar connectors work with many rigid, flexible, and folding solar panels
- 10 ft / 3 m length gives you more freedom when positioning panels
- Great for portable solar setups including camping, RV, vanlife, cabins, and backup power
Technical Specifications
| Length | 10 ft / 3 m |
| Wire Size | 10 AWG / 4mm² |
| Conductor Material | Pure copper |
| Solar Panel Connection | MC4-style male + female connectors |
| Power Station Connection | XT60i female connector |
| Maximum Current | 30A max |
Always confirm your power station’s solar input voltage, current, and wattage limits before connecting solar panels.
Applications
- EcoFlow, Bluetti, and other compatible XT60 / XT60i power stations
- Portable solar charging setups
- Camping, RV, trailer, and vanlife systems
- Cabin, off-grid, and emergency backup power
- Connecting MC4 solar panels to solar generators
Frequently Asked
What is this cable used for?
This cable is used to connect solar panels with MC4-style connectors to a portable power station that uses an XT60i or XT60-style solar input.
Many rigid, flexible, and folding solar panels use MC4 connectors as their standard output. Many portable power stations use XT60 or XT60i as their solar charging input. This cable bridges those two connection styles.
Will this work with EcoFlow power stations?
Many EcoFlow power stations use XT60 or XT60i-style solar input ports, so this cable is commonly used with EcoFlow units.
You still need to check the solar input specifications for your exact model. Confirm the maximum solar input voltage, current limit, and wattage limit before connecting your panel.
Will this work with Bluetti, Jackery, Anker, or other power stations?
It may, as long as your power station uses a compatible XT60 or XT60i-style solar input and your solar panel voltage/current is within the power station’s allowed range.
Some power stations use barrel plugs, aviation connectors, Anderson-style connectors, or brand-specific adapters instead. Please confirm your connector type before ordering.
Is it safe to unplug this while charging?
It's best to avoid unplugging the cable while your solar panels are actively producing power and your power station is charging. Disconnecting a DC circuit under load can create a small electrical arc, which may gradually damage the connector contacts or your power station's solar input port over time.
Before disconnecting the cable, either cover the solar panels to stop power production or use a PV disconnect breaker to safely isolate the solar array. This simple step helps prevent arcing, protects your equipment, and can extend the life of both the cable and your power station.
Our 32A 2-Pole Solar PV Disconnect Kit lets you safely isolate your solar panels before connecting or disconnecting your power station. It's an inexpensive upgrade that helps protect your equipment while making maintenance and setup much easier.
Can I extend this cable?
Yes. If you need additional distance between your solar panels and power station, it's generally better to extend the MC4 (solar panel) side of the system rather than the XT60i side. MC4 extension cables are designed specifically for outdoor solar installations and are available in a variety of lengths.
Using quality extension cables with adequately sized wire helps minimize voltage drop and maintain charging performance. For longer runs or higher-power solar arrays, choosing heavier gauge cable (such as 10AWG) is recommended to reduce losses.
If you need help selecting the correct extension cable for your solar panel size or cable length, we're always happy to help.
What is the difference between XT60 and XT60i?
XT60i is a variation of the XT60 connector that includes an additional signal pin. Some power stations use this extra pin to identify the cable type or enable higher solar input behaviour.
In many cases, an XT60i-style cable can physically connect to XT60-style inputs, but compatibility depends on the power station. If your device specifically requires XT60i for full solar charging performance, using the correct XT60i cable is important.
Does this cable increase charging power?
The cable itself does not create more power or boost the output of your solar panels. However, the XT60i connection may allow some compatible power stations to recognize the cable as a solar input cable and accept a higher charge rate than they would with a standard low-power adapter.
The heavy 10AWG copper wire also helps reduce voltage drop compared with smaller wire, which can be helpful when using larger panels or longer cable runs.
Can I connect multiple solar panels with this cable?
Yes, this cable can be used with multiple panels if the panels are combined using proper MC4 branch connectors or other suitable solar wiring hardware.
The total voltage and current of the combined panel setup must stay within the solar input limits of your power station. This is especially important when connecting panels in series, because voltage adds together and can quickly exceed the safe input range of some portable power stations.
Can this cable reduce charging losses?
Yes. Heavier wire can help reduce voltage drop, especially compared with small-gauge adapter cables. This cable uses 10AWG pure copper conductors, making it better suited for higher-current portable solar charging setups.
Actual charging performance still depends on your solar panel size, sun conditions, panel angle, power station limits, and total cable length.
Do I need to check polarity?
Yes. Always confirm polarity before connecting solar equipment, especially when mixing different brands of panels, adapters, or extension cables.
MC4-style connectors are widely used, but polarity conventions can vary depending on the product. Incorrect polarity can prevent charging or potentially damage equipment.
Can I use this with a solar charge controller?
This cable is designed for connecting MC4-equipped solar panels directly to portable power stations with XT60i or XT60 solar input ports.
It is not normally used between a solar panel and a traditional standalone solar charge controller, unless that controller specifically uses an XT60-style solar input connection.
Need help choosing the right cable?
If you are unsure which solar adapter cable you need, please contact us with the make and model of your power station, along with the solar panel you plan to use.
You can also read our guide here: Portable Power Station Solar Charging Input Information.
Share
Nice product from a helpful knowledgeable person.
The cables are also a thinker gauge wire than the EcoFlow brand connectors.
He knows what I need and always has it.
Got my new portable ecoflow running with my solar panels. Cable feels pretty durable
thank you very much for your help
you are awesome person 😁
Was exactly what I needed to get my ecoflow connected to the solar panel on my truck roof rack. Now it can charge in the back of the truck while i'm camping