32% OFF
  •
1 8

Sapphire Energy

10A SMART Battery Charger (12/24V)

10A SMART Battery Charger (12/24V)

$26.95 CAD
$39.95 CAD $26.95 CAD
Sale Sold out

HTRC P10 Battery Charger

Compact, versatile, and easy to use — the HTRC P10 supports both 12V and 24V systems across lithium (LiFePO4) and lead-acid chemistries. Its microprocessor-controlled multi-stage profiles deliver safe, consistent charging, with PULSE and Repair modes for lead-acid recovery.

With up to 10A at 12V (5A @ 24V), you can recharge a 100Ah LiFePO4 battery in about 10 hours from empty (ideal conditions). Clip on the alligator clamps, choose your mode, and let the charger handle the rest.

Why You’ll Love It

  • Automatic voltage detection — works seamlessly with 12V or 24V batteries
  • Safe & smart — microprocessor control, reverse polarity protection, and seasonal (summer/winter) compensation
  • Right-sized power — steady 10A output at 12V (5A at 24V); use current limits for smaller batteries
  • Portable & cool — lightweight with temperature-managed cooling
  • Versatile modes — includes a forced charge function to re-activate deeply discharged lead-acid and wake up undercharged lithium packs (below BMS cut-off)
  • Motorcycle mode — optional 3A limit for small powersports batteries
  • Reliable memory — remembers the last charging mode used

Note: If you’re using forced charge to wake a lithium battery below BMS cut-off, stay with the battery and monitor progress. Once the pack reaches a healthy voltage, switch back to the normal LiFePO4 profile for regular charging.

Perfect for travel kits, small workshops, and routine maintenance. The P10’s forced charge mode can revive heavily discharged lead-acid batteries and safely “wake” lithium packs before switching back to the normal LiFePO4 profile. Automatic temperature compensation adapts for extreme winter and summer conditions.

Perfect For

  • RV & Vanlife — top up house batteries on shore power or a generator
  • Off-grid cabins — maintain backup batteries during low-solar stretches
  • Marine / boats — reliable charging for onboard lithium or lead-acid banks
  • Workshop & garage — maintenance charging for cars, motorcycles, ATVs, tractors
  • Emergency backup — revive dead lead-acid or wake undercharged lithium when it matters
  • Travel & service kits — lightweight, compact, and easy to carry

Specifications

Model HTRC P10
AC Input 100–240V (50/60Hz)
DC Output 12V (10A max) / 24V (5A max)
Supported Batteries LiFePO4 / Lithium / Lead Acid (AGM, GEL, EFB, MF, Flooded, VRLA, SLA)
Minimum Start Voltage 9V
Suggested Capacity Up to 200Ah (larger supported with extended charging times)
Compliant Standards CE, FCC, UKCA, RoHS, PSE
Weight 470 g

What’s Included

  • HTRC P10 Charger Unit
  • AC Power Cord
  • Alligator-Style Battery Clamps
  • Instruction Manual

FAQ

Can the P10 wake up a lithium battery that’s below cut-off?

Yes. Use the built-in forced charge function to safely “wake up” undercharged LiFePO4 batteries that have tripped their BMS cut-off. Monitor closely and switch to the normal LiFePO4 mode once the pack reaches a healthy voltage.

What size batteries can it charge?

It’s suitable up to ~200Ah at 12V (~100Ah at 24V). Larger banks are supported; charging times will extend accordingly.

Does it have a dedicated LiFePO4 mode?

Yes. Select the LiFePO4 mode for correct charge voltages and multi-stage control tailored to lithium iron phosphate chemistry. Press the MODE button until the corresponding LED turns on.

Will it remember my last mode?

Yes. Mode memory recalls your last used charging mode for quick setup next time.

Can I limit current for smaller batteries?

Yes. Use the Motorcycle Mode to limit charging to 3A.

Is the fan loud?

The fan is temperature-managed and ramps as needed. It’s quiet at light loads and increases to manage heat during higher output.

Does it have repair/desulfation for lead-acid?

Yes. PULSE and Repair modes help address sulfation and restore performance on lead-acid batteries.

Can I charge with loads connected?

Generally yes for moderate loads, but charging will be slower. For fastest, most consistent charging, minimize heavy loads during the charge cycle.

Can I use it with a generator?

Yes — as long as the generator provides stable AC within 100–240V, 50/60Hz. For best results use an inverter generator, let it warm up and stabilize before connecting, avoid overloaded/unstable outputs, use a proper-gauge extension cord, and keep cable runs short.

What protections are included?

Reverse polarity, over-temperature, seasonal (summer/winter) compensation, and microprocessor-controlled multi-stage charging.

Will it work on 120V and 240V AC?

Yes. Wide-range input: 100–240V AC, 50/60Hz.

View full details