{"product_id":"xt60-fused-battery-cable-90cm-m8-ring-10awg","title":"Fused Battery Cable 10AWG w\/XT60","description":"\n\u003cdiv class=\"sapphire-product-description\"\u003e\n\u003cdiv class=\"sapphire-title\"\u003eXT60 Fused Battery Cable\u003c\/div\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\u003cp class=\"sapphire-p\"\u003eA 90 cm (3 ft) fused XT60 battery cable designed for clean, reliable connections between batteries, chargers, and XT60-compatible devices (including XT60i). Ideal for portable power stations, permanently installed chargers, and shore power or generator setups where you want safe, automatic charging without repeatedly accessing the battery.\u003c\/p\u003e\n\u003cdiv class=\"sapphire-section-title\"\u003eWhy You’ll Love It\u003c\/div\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\u003cul class=\"sapphire-checklist\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean XT60 disconnect\u003c\/strong\u003e — quick service disconnect without loose clamps or messy wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline fuse protection\u003c\/strong\u003e — keeps protection close to the battery where it should be\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for installs\u003c\/strong\u003e — M8 ring terminals make semi-permanent or permanent connections easy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile spare cable\u003c\/strong\u003e — easy to adapt for solar, chargers, or DC loads in a pinch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks with XT60i devices \u003c\/strong\u003e— Most XT60i devices are compatible (incl EcoFlow and Similar)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"sapphire-section-title\"\u003eCommon Uses\u003c\/div\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\u003ch4\u003eExpand Portable Power Stations (and solve diesel heater startup issues)\u003c\/h4\u003e\n\u003cp class=\"sapphire-p\"\u003eMost portable power stations can accept charging from an XT60 DC input, but many struggle to run high-startup loads (such as diesel heaters) directly from their built-in 12 V outputs. Even if the heater runs fine once started, the initial surge can cause voltage drop or shutdown on some power station ports.\u003c\/p\u003e\n\u003cp class=\"sapphire-p\"\u003ePairing this cable with an \u003cstrong\u003eexternal 12 V battery\u003c\/strong\u003e lets the battery handle diesel heater startup reliably, while the power station charges from the battery via XT60. You get a more capable system with \u003cstrong\u003ebetter load handling\u003c\/strong\u003e and \u003cstrong\u003emore total usable capacity\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul class=\"sapphire-checklist\"\u003e\n\u003cli\u003eExternal battery handles high startup current\u003c\/li\u003e\n\u003cli\u003eSolar can keep the external battery topped up\u003c\/li\u003e\n\u003cli\u003ePower station charges from the battery through XT60 for a stable input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"sapphire-callout sapphire-callout-blue\"\u003e\n\u003cp\u003eWant the “budget powerhouse” setup? Add a solar controller + panel to the external battery, and you’ve got a robust, expandable system for minimal cost.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eExternal Battery Chargers (XT60-ready)\u003c\/h4\u003e\n\u003cp class=\"sapphire-p\"\u003eThis cable is an easy way to create a fused, quick-disconnect charger connection for semi-permanent or permanent installs — great for vans, cabins, and battery banks you don’t want to access every time.\u003c\/p\u003e\n\u003cdiv class=\"sapphire-callout sapphire-callout-yellow\"\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible chargers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKnown good choices for easy connections with the cable.  Connect to your battery (or busbars) and make charging easy.\u003c\/p\u003e\n\u003cdiv class=\"sapphire-cta-group\"\u003e\n\u003ca rel=\"noopener\" href=\"https:\/\/sapphirebattery.ca\/products\/20a-battery-charger\" class=\"sapphire-cta\" target=\"_blank\"\u003e 20A Charger \u003c\/a\u003e \u003ca rel=\"noopener\" href=\"https:\/\/sapphirebattery.ca\/products\/35a-smart-battery-charger\" class=\"sapphire-cta\" target=\"_blank\"\u003e 35A Smart Charger \u003c\/a\u003e \u003ca rel=\"noopener\" href=\"https:\/\/sapphirebattery.ca\/products\/36v-48v-smart-battery-charger\" class=\"sapphire-cta\" target=\"_blank\"\u003e 36\/48V Charger \u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch4\u003eShore Power \u0026amp; Generator Setups (set it once, forget it)\u003c\/h4\u003e\n\u003cp class=\"sapphire-p\"\u003eThe idea here is simple: permanently connect your charger to the battery, then connect the charger’s AC input to your shore power circuit (or generator feed). When AC power becomes available, the charger starts automatically — no need to clip on leads, move cables around, or open hard-to-reach compartments.\u003c\/p\u003e\n\u003cul class=\"sapphire-checklist\"\u003e\n\u003cli\u003eAutomatically starts charging when shore power is connected\u003c\/li\u003e\n\u003cli\u003eNo fussing with temporary clamps or awkward battery access\u003c\/li\u003e\n\u003cli\u003eIdeal for batteries under beds, seats, cabinets, or exterior compartments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"sapphire-callout sapphire-callout-blue\"\u003e\n\u003cp\u003eThe XT60 connector makes a clean service disconnect, and the inline fuse keeps protection close to the battery — ideal for semi-permanent and permanent installs.\u003c\/p\u003e\n\u003cp style=\"margin-top: 0.75rem; text-align: center;\"\u003e\u003ca rel=\"noopener\" href=\"https:\/\/sapphirebattery.ca\/products\/15a-125v-shore-power-inlet\" class=\"sapphire-cta\" target=\"_blank\"\u003e Shop Shore Power Inlet \u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sapphire-section-title\"\u003eMod-Friendly \u0026amp; Versatile\u003c\/div\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\u003cul class=\"sapphire-checklist\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eMC4 solar input mod:\u003c\/strong\u003e cut the ring terminals and add MC4 ends for solar → power station connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect DC jumper:\u003c\/strong\u003e cut the XT60 end off for a tidy controller → battery or battery → DC load jumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmergency spare:\u003c\/strong\u003e a great cable to keep on hand for last-minute system changes and repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"sapphire-section-title\"\u003eSpecifications\u003c\/div\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\u003ctable style=\"width: 100.003%; height: 176.458px;\" class=\"sapphire-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6065px;\"\u003e\n\u003ctd style=\"width: 35.5877%; height: 19.6065px;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 62.1066%; height: 19.6065px;\"\u003e90 cm (3 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6065px;\"\u003e\n\u003ctd style=\"width: 35.5877%; height: 19.6065px;\"\u003e\u003cstrong\u003eWire Gauge\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 62.1066%; height: 19.6065px;\"\u003e10 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6065px;\"\u003e\n\u003ctd style=\"width: 35.5877%; height: 19.6065px;\"\u003e\u003cstrong\u003eWire Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 62.1066%; height: 19.6065px;\"\u003ePure Copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6065px;\"\u003e\n\u003ctd style=\"width: 35.5877%; height: 19.6065px;\"\u003e\u003cstrong\u003eInsulation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 62.1066%; height: 19.6065px;\"\u003ePVC 105°C 600V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6065px;\"\u003e\n\u003ctd style=\"width: 35.5877%; height: 19.6065px;\"\u003e\u003cstrong\u003eDevice Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 62.1066%; height: 19.6065px;\"\u003eXT60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6065px;\"\u003e\n\u003ctd style=\"width: 35.5877%; height: 19.6065px;\"\u003e\u003cstrong\u003eBattery Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 62.1066%; height: 19.6065px;\"\u003eM8 \/ 5\/16″ ring terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6065px;\"\u003e\n\u003ctd style=\"width: 35.5877%; height: 19.6065px;\"\u003e\u003cstrong\u003eFuse Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 62.1066%; height: 19.6065px;\"\u003eATC \/ ATO blade fuse (inline, weatherproof holder)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6065px;\"\u003e\n\u003ctd style=\"width: 35.5877%; height: 19.6065px;\"\u003e\u003cstrong\u003eIncluded Fuse\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 62.1066%; height: 19.6065px;\"\u003e30 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6065px;\"\u003e\n\u003ctd style=\"width: 35.5877%; height: 19.6065px;\"\u003e\u003cstrong\u003eRecommended Fuse Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 62.1066%; height: 19.6065px;\"\u003eUp to 40 A maximum recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"sapphire-section-title\"\u003eWhat’s Included\u003c\/div\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\u003cul class=\"sapphire-suggested\"\u003e\n\u003cli\u003eXT60 connector (quick disconnect)\u003c\/li\u003e\n\u003cli\u003eWeatherproof inline ATC \/ ATO fuse holder\u003c\/li\u003e\n\u003cli\u003e30 A ATC fuse installed\u003c\/li\u003e\n\u003cli\u003eM8 (5\/16″) ring terminals\u003c\/li\u003e\n\u003cli\u003e10 AWG cable\u003c\/li\u003e\n\u003cli\u003e90 cm (3 ft) overall length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"sapphire-callout sapphire-callout-yellow\"\u003e\n\u003cp\u003e\u003cstrong\u003eFuse sizing:\u003c\/strong\u003e Uses standard ATC \/ ATO blade fuses. \u003cstrong\u003eUp to 40 A maximum recommended.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin-top: 0.75rem;\"\u003eNeed additional fuse sizes? \u003ca rel=\"noopener\" href=\"https:\/\/sapphirebattery.ca\/products\/atc-ato-blade-fuses-ul-canada-5pk\" class=\"sapphire-link\" target=\"_blank\"\u003e ATC \/ ATO Blade Fuses (UL) – 5 Pack \u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sapphire-section-title\"\u003eFrequently Asked\u003c\/div\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\u003cdiv class=\"sapphire-faq\"\u003e\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eWhat is this cable mainly used for?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eIt creates a fused, quick-disconnect connection between batteries, chargers, and XT60-compatible devices. Common uses include portable power station expansion, permanent charger wiring, and shore power setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eWill this work with my portable power station?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eIt works with power stations that support \u003cstrong\u003eXT60 \/ XT60i\u003c\/strong\u003e DC input. Always confirm connector polarity and input requirements in your power station documentation before connecting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eIs this compatible with XT60i?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eYes. XT60i is a physically compatible connector. The XT60i connector has a 3rd pin, often used to signal devices regarding how much power they can draw.\u003c\/p\u003e\n\u003cp\u003eFor devices using the XT60i connection, your charging\/amperage may be automatically limited by the device for safety reasons. This is ok.\u003c\/p\u003e\n\u003cp\u003eIf you need help, just contact us!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eHow does this help with diesel heaters?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eDiesel heaters can draw high startup current. Using an external 12 V battery lets the battery handle startup reliably, while your power station charges from the battery via XT60 instead of trying to run the heater from a limited 12 V port.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eDo I need to permanently connect my charger?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eNo. Permanent installs are a popular use, but this cable is also a handy way to use a charger for portable charging while still being able to quickly and easily connect to batteries installed in hard-to-reach areas.\u003c\/p\u003e\n\u003cp\u003eJust plug into the charger’s XT60 connection, connect to your battery once, and charging becomes quick and painless — without wrestling with clamps or digging into compartments every time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eCan I use this for a “shore power” setup?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eYes. Permanently connect the charger to the battery using this cable, then connect the charger’s AC input to your shore power circuit (or generator feed). When AC power is available, charging starts automatically — no clips, no fuss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eWhat fuse sizes can I use?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eThe cable ships with a 30 A ATC\/ATO fuse installed. Standard ATC\/ATO blade fuses can be used, with \u003cstrong\u003eup to 40 A maximum recommended.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/sapphirebattery.ca\/products\/atc-ato-blade-fuses-ul-canada-5pk\" class=\"sapphire-link\" target=\"_blank\"\u003e Shop additional ATC\/ATO fuse sizes \u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eCan I modify the ends (MC4, different terminals, etc.)?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eYes. Many customers adapt this cable by changing one end (MC4 for solar, different terminals, or creating a clean DC jumper). \u003c\/p\u003e\n\u003cp\u003eIf you’re unsure what to change for your setup, contact us and we’ll help you plan it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n  \n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eI'm charging. Why isn't my battery monitor showing that?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eBattery monitors need to be the \u003cb\u003eONLY\u003c\/b\u003e thing connected to the battery's negative terminal.  If you are charging direct to the battery, you are bypassing the monitor's sensor.\u003c\/p\u003e\n  \u003cp\u003eTo fix, simply move the charger cable's negative wire to either a busbar or the load side of the shunt (NOT the B- side).\u003c\/p\u003e\n\u003cp\u003e\n    \u003c\/p\u003e\n\u003cp\u003eMoving the negative lead should correct the issue.   If you still need more help, contact us (and include any details you can)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sapphire Energy","offers":[{"title":"Default Title","offer_id":52216942133567,"sku":"CBL-XT10003FU-M8","price":12.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/6803\/8463\/files\/XT60-M8-Fused_coiled_white_bg_1600px_1.webp?v=1770245393","url":"https:\/\/sapphirebattery.ca\/products\/xt60-fused-battery-cable-90cm-m8-ring-10awg","provider":"Sapphire Energy","version":"1.0","type":"link"}