{"product_id":"kinetic-solar-khsl-m-l-standing-seam-clamp","title":"Kinetic Solar KHSL-M-L Large Standing Seam Clamp","description":"\u003cdiv class=\"sapphire-product-content\"\u003e\n\n\u003ch2 class=\"sapphire-section-title\"\u003eSimplified Solar Mounting for Standing-Seam Roofs\u003c\/h2\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cp class=\"sapphire-p\"\u003eThe \u003cstrong\u003eKinetic Solar Large Standing Seam Clamp\u003c\/strong\u003e (KHSL-M-L) provides a secure, non-penetrating attachment point for mounting compatible Kinetic Solar rails on standing-seam metal roofs. Its larger clamp profile accommodates compatible standing seams up to 1 inch wide at the top.\u003c\/p\u003e\n\n\u003cp class=\"sapphire-p\"\u003eIts integrated Standing-L design performs the job normally handled by a separate roof-mounting foot and L-bracket. This reduces the number of components, connections and installation steps required at each attachment point.\u003c\/p\u003e\n\n\u003cdiv class=\"sapphire-callout sapphire-callout-blue\"\u003e\n\u003cdiv class=\"sapphire-callout-title\"\u003eNon-Penetrating Roof Attachment\u003c\/div\u003e\n\u003cp class=\"callout-p\"\u003eThe KHSL-M-L mechanically clamps onto the raised standing seam without drilling holes or installing screws through the roof panel. For compatible standing-seam roofs, this provides a clean solar mounting solution while avoiding the additional roof penetrations associated with conventional mounting feet.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2 class=\"sapphire-section-title\"\u003eWhy You'll Love It\u003c\/h2\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cul class=\"sapphire-checklist\"\u003e\n\u003cli\u003eNon-penetrating attachment for standing-seam metal roofs\u003c\/li\u003e\n\u003cli\u003eNo drilling or fasteners through the roof panel\u003c\/li\u003e\n\u003cli\u003eReplaces a separate mounting foot and L-bracket combination\u003c\/li\u003e\n\u003cli\u003eReduces component count at each attachment point\u003c\/li\u003e\n\u003cli\u003eFewer connections help simplify installation\u003c\/li\u003e\n\u003cli\u003eAccommodates standing-seam profiles up to 1 inch wide at the top\u003c\/li\u003e\n\u003cli\u003eIncludes the hardware required to attach a compatible Kinetic rail\u003c\/li\u003e\n\u003cli\u003eDesigned for use with Kinetic Solar racking products\u003c\/li\u003e\n\u003cli\u003eMill-finish aluminum construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 class=\"sapphire-section-title\"\u003eOne Component Replaces Two\u003c\/h2\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cp class=\"sapphire-p\"\u003eA conventional solar rail attachment commonly requires both a roof-mounting foot and a separate L-bracket. The KHSL-M-L combines the roof clamp and vertical rail-attachment point into one compact assembly.\u003c\/p\u003e\n\n\u003cp class=\"sapphire-p\"\u003eThis integrated design reduces the number of individual components that need to be ordered, handled and installed. It also eliminates the separate connection normally required between the mounting foot and L-bracket.\u003c\/p\u003e\n\n\u003ch2 class=\"sapphire-section-title\"\u003eDesigned for Kinetic Solar Rails\u003c\/h2\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cp class=\"sapphire-p\"\u003eThe clamp includes the Kinetic rail-attachment hardware required to connect compatible Kinetic Solar racking, including the commonly used Rapid 1 rail. Once secured to the standing seam, the rail attaches directly to the integrated vertical mounting surface.\u003c\/p\u003e\n\n\u003cp class=\"sapphire-p\"\u003eThe number and spacing of clamps must be determined according to the racking design, roof construction, seam capacity, array dimensions, and local wind and snow loads.\u003c\/p\u003e\n\n\u003ch2 class=\"sapphire-section-title\"\u003eSpecifications\u003c\/h2\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cdiv class=\"sapphire-table-wrap\"\u003e\n\u003ctable class=\"sapphire-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eKinetic Solar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eKHSL-M-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eSolar rail attachment on standing-seam metal roofs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Method\u003c\/td\u003e\n\u003ctd\u003eNon-penetrating mechanical seam clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Seam Width\u003c\/td\u003e\n\u003ctd\u003eUp to 1 inch at the top of the seam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Width\u003c\/td\u003e\n\u003ctd\u003e2 inches (50.8mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Height\u003c\/td\u003e\n\u003ctd\u003e4 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamp Opening Height\u003c\/td\u003e\n\u003ctd\u003e1.25 inches (31.8mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail Compatibility\u003c\/td\u003e\n\u003ctd\u003eKinetic Rapid 1 and other compatible Kinetic Solar rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMill finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntegrated Function\u003c\/td\u003e\n\u003ctd\u003eReplaces a separate roof-mounting foot and L-bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eStanding-seam clamp assembly and Kinetic rail-attachment hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2 class=\"sapphire-section-title\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cdiv class=\"sapphire-faq\"\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eDoes this clamp require holes in the roof?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp class=\"sapphire-p\"\u003eNo. The KHSL-M-L mechanically clamps onto the raised standing seam without drilling holes or driving fasteners through the metal roof panel.\u003c\/p\u003e\n\u003cp class=\"sapphire-p\"\u003eThe roof profile and seam construction must be compatible with this mounting method, and the roof manufacturer should permit the attachment of mechanical seam clamps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eHow does it reduce the number of racking components?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp class=\"sapphire-p\"\u003eThe clamp combines the functions of a standalone roof-mounting foot and an L-bracket. A compatible Kinetic rail attaches directly to the integrated vertical portion of the clamp, eliminating a separate foot, L-bracket and the connection between them.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eWhich roof types is it designed for?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp class=\"sapphire-p\"\u003eThe KHSL-M-L is designed specifically for compatible standing-seam metal roofs. It is not intended for corrugated metal panels, exposed-fastener roofing, asphalt shingles or other roof types without a suitable standing seam.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eWill it fit every standing-seam profile?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp class=\"sapphire-p\"\u003eNo single seam clamp fits every standing-seam profile. The KHSL-M-L is the larger Kinetic Standing L and accommodates compatible seams measuring up to 1 inch wide at the top.\u003c\/p\u003e\n\u003cp class=\"sapphire-p\"\u003eConfirm the seam dimensions, shape and roof-manufacturer requirements before installation. The smaller KHSL-M is intended for compatible seams up to 3\/4 inch wide.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eWhich solar rails can be attached?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp class=\"sapphire-p\"\u003eThe KHSL-M-L is designed for compatible Kinetic Solar racking rails, including the Rapid 1 rail. The clamp includes the Kinetic attachment hardware needed to secure the rail to its integrated mounting point.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eCan solar panels mount directly to the clamp?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp class=\"sapphire-p\"\u003eNo. The KHSL-M-L attaches the solar racking rail to the roof seam. The solar modules are then mounted to the rail using compatible Kinetic mid clamps and end clamps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eHow many clamps will my installation require?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp class=\"sapphire-p\"\u003eThe required quantity and spacing depend on the racking layout, rail spans, roof-seam capacity, array size, building location, and applicable wind and snow loads. Follow the engineered racking design rather than using a fixed number of clamps per panel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eDoes the clamp provide electrical bonding?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp class=\"sapphire-p\"\u003eThe KHSL-M-L is primarily a structural roof attachment and should not be assumed to complete the array's electrical bonding path. Use the appropriate Kinetic bonding mid clamps, bonding hardware and grounding lug required by the system design.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eWill the clamp damage the roof seam?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp class=\"sapphire-p\"\u003eThe clamp is designed to grip a compatible standing seam without penetrating the roof panel. Correct positioning and tightening are important to prevent seam deformation or an insecure attachment.\u003c\/p\u003e\n\u003cp class=\"sapphire-p\"\u003eConfirm compatibility with the roof manufacturer and follow the applicable Kinetic installation and engineering requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"sapphire-callout sapphire-callout-blue\"\u003e\n\u003cdiv class=\"sapphire-callout-title\"\u003eNot Sure Whether Your Roof Seam Is Compatible?\u003c\/div\u003e\n\u003cp class=\"callout-p\"\u003eSend us the seam dimensions and a clear photo or profile drawing. We can help determine whether the KHSL-M-L is appropriate and identify the other Kinetic Solar racking components required for your array.\u003c\/p\u003e\n\n\u003cdiv class=\"sapphire-cta-group\"\u003e\n\u003ca class=\"sapphire-cta\" href=\"https:\/\/sapphirebattery.ca\/pages\/contact\" target=\"_blank\" rel=\"noopener\"\u003eContact Us\u003c\/a\u003e\n\u003ca class=\"sapphire-cta\" href=\"https:\/\/sapphirebattery.ca\/collections\/solar-racking\" target=\"_blank\" rel=\"noopener\"\u003eShop Solar Racking\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Kinetic Solar","offers":[{"title":"Default Title","offer_id":52356021059903,"sku":"KIN-8003","price":16.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/6803\/8463\/files\/kinetic-khsl-mm-standing-l-bracket-02_550px.webp?v=1775238873","url":"https:\/\/sapphirebattery.ca\/products\/kinetic-solar-khsl-m-l-standing-seam-clamp","provider":"Sapphire Energy","version":"1.0","type":"link"}