{"product_id":"kinetic-k-flash-premium-roof-mount-kflk-44s","title":"Kinetic K-Flash™ Premium Roof Mount (KFLK-44S)","description":"\u003cdiv class=\"sapphire-product-description\"\u003e\n\u003ch2 class=\"sapphire-title\"\u003eKinetic K-Flash™ Deck-Mount Roof Attachment (KFLK-44S)\u003c\/h2\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cp class=\"sapphire-p\"\u003eIf you're investing in a rooftop solar array, the roof attachment is not the place to cut corners. The \u003cstrong\u003eKinetic K-Flash™ KFLK-44S\u003c\/strong\u003e is a premium flashed roof mount designed specifically for asphalt shingle solar installations, providing a clean, professional attachment point with excellent long-term leak protection.\u003c\/p\u003e\n\n\u003cp class=\"sapphire-p\"\u003eUnlike basic roof mounts that depend heavily on sealants around exposed roof penetrations, the K-Flash uses a large integrated flashing that slides beneath the shingles and safely sheds water around the attachment point. It is one of the best waterproofing options available for shingled-roof solar installations.\u003c\/p\u003e\n\n\u003cp class=\"sapphire-p\"\u003eThis listing is for the \u003cstrong\u003eKFLK-44S direct-to-deck version\u003c\/strong\u003e of the Kinetic K-Flash system. It includes four 1\/4-inch × 2-inch self-drilling structural screws, allowing the mount to be positioned on suitable roof decking without requiring every attachment to line up directly over a roof truss.\u003c\/p\u003e\n\n\u003cdiv class=\"sapphire-callout sapphire-callout-yellow\"\u003e\n\u003cdiv class=\"sapphire-callout-title\"\u003eFlexible Mount Placement\u003c\/div\u003e\n\u003cp class=\"callout-p\"\u003eThe KFLK-44S uses four structural screws to distribute the attachment load across suitable roof decking. This provides greater flexibility when laying out solar rails because mounts do not normally need to be centred directly over roof trusses. Roof decking, design loads, spacing and local requirements must still be verified for the installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"sapphire-callout sapphire-callout-blue\"\u003e\n\u003cdiv class=\"sapphire-callout-title\"\u003ePremium Waterproofing Protection\u003c\/div\u003e\n\u003cp class=\"callout-p\"\u003eK-Flash combines a full flashing beneath the shingles with a raised sealant channel and a separate blind mounting stud. This design directs water around the attachment point while avoiding an exposed fastener through the top of the flashing.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch3 class=\"sapphire-section-title\"\u003eWhy You’ll Love It\u003c\/h3\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cul class=\"sapphire-checklist\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-to-deck mounting\u003c\/strong\u003e provides greater flexibility when positioning roof attachments and rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour structural screws\u003c\/strong\u003e distribute the attachment load across suitable roof decking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo truss alignment normally required\u003c\/strong\u003e when installed on an approved roof deck according to the project design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium flashed roof attachment\u003c\/strong\u003e designed specifically for asphalt shingle solar installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent waterproofing protection\u003c\/strong\u003e with a large flashing footprint and raised sealant channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate blind mounting stud\u003c\/strong\u003e avoids placing the L-bracket fastener through the flashing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstaller-friendly design\u003c\/strong\u003e supports fast, clean and professional installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional black finish\u003c\/strong\u003e blends well with most asphalt shingle roofs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-year Kinetic limited warranty\u003c\/strong\u003e when installed according to manufacturer requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"sapphire-callout sapphire-callout-blue\"\u003e\n\u003cdiv class=\"sapphire-callout-title\"\u003eComplete Rooftop Mounting Solution\u003c\/div\u003e\n\u003cp class=\"callout-p\"\u003ePair the KFLK-44S with the KLB3-M L-Bracket Kit and Rapid-1 Rail system for a professional-grade rooftop solar mounting solution designed for long-term strength, clean installation and reliable service.\u003c\/p\u003e\n\u003cdiv class=\"sapphire-cta-group\"\u003e\n\u003ca rel=\"noopener\" href=\"\/products\/klb3-m-3-l-bracket-kit\" class=\"sapphire-cta\" target=\"_blank\"\u003eShop KLB3-M L-Bracket Kit\u003c\/a\u003e\n\u003ca rel=\"noopener\" href=\"\/products\/rapid-1-rail-140-clear-anodized\" class=\"sapphire-cta\" target=\"_blank\"\u003eShop Rapid-1 Rail\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch3 class=\"sapphire-section-title\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003ctable class=\"sapphire-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eKFLK-44S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoof Type\u003c\/td\u003e\n\u003ctd\u003eAsphalt Shingle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Type\u003c\/td\u003e\n\u003ctd\u003eFully Flashed, Direct-to-Deck Roof Attachment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStructural Attachment Points\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Fasteners\u003c\/td\u003e\n\u003ctd\u003eFour 1\/4\" × 2\" Self-Drilling Structural Screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTruss Attachment Required\u003c\/td\u003e\n\u003ctd\u003eNot normally required when attached to suitable roof decking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlashing Size\u003c\/td\u003e\n\u003ctd\u003e9\" × 12\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlashing Material\u003c\/td\u003e\n\u003ctd\u003eMalleable Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Plate\u003c\/td\u003e\n\u003ctd\u003eMill-Finish Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eStainless Steel \/ Coated Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eTextured Black Powder-Coated Flashing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRail Compatibility\u003c\/td\u003e\n\u003ctd\u003eRapid-1 System and Compatible L-Brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 2703 \/ LTR AE-001-2012 as part of the K-Rack system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eResidential and commercial solar installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e20-Year Kinetic Limited Product Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3 class=\"sapphire-section-title\"\u003eApplications\u003c\/h3\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cul class=\"sapphire-checklist\"\u003e\n\u003cli\u003eResidential rooftop solar systems\u003c\/li\u003e\n\u003cli\u003eInstallations where roof mounts cannot all align with trusses\u003c\/li\u003e\n\u003cli\u003eOff-grid cabins and cottages\u003c\/li\u003e\n\u003cli\u003eGarages, workshops and outbuildings\u003c\/li\u003e\n\u003cli\u003eTiny homes and accessory buildings\u003c\/li\u003e\n\u003cli\u003eAgricultural buildings\u003c\/li\u003e\n\u003cli\u003eCommercial rooftop solar arrays\u003c\/li\u003e\n\u003cli\u003eRetrofit installations on existing asphalt shingle roofs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 class=\"sapphire-section-title\"\u003eWhat's Included\u003c\/h3\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cul class=\"sapphire-checklist\"\u003e\n\u003cli\u003eOne Kinetic K-Flash flashing\u003c\/li\u003e\n\u003cli\u003eOne aluminum mounting baseplate with blind attachment stud\u003c\/li\u003e\n\u003cli\u003eFour 1\/4\" × 2\" self-drilling structural screws\u003c\/li\u003e\n\u003cli\u003eSerrated flange nut\u003c\/li\u003e\n\u003cli\u003eManufacturer-supplied hardware package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"sapphire-callout sapphire-callout-sand\"\u003e\n\u003cdiv class=\"sapphire-callout-title\"\u003eDesigned for Suitable Roof Decking\u003c\/div\u003e\n\u003cp class=\"callout-p\"\u003eThe KFLK-44S offers excellent layout flexibility, but the roof deck must still be capable of supporting the required loads. Mount spacing, decking material and thickness, local wind and snow loads, and applicable building requirements must all be considered when designing the array.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch3 class=\"sapphire-section-title\"\u003eFrequently Asked\u003c\/h3\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003ch3 class=\"sapphire-section-title\"\u003eFrequently Asked\u003c\/h3\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cdiv class=\"sapphire-faq\"\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eDoes this mount need to land on a roof truss?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo.\u003c\/strong\u003e The KFLK-44S attaches directly to the roof deck using four 1\/4-inch × 2-inch structural screws. This allows you to position the mounts where the rails need support instead of trying to line every mount up with a truss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eWhat type of roof deck can it attach to?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eThe KFLK-44S can be installed over continuous structural roof decking made from \u003cstrong\u003e7\/16-inch OSB or better\u003c\/strong\u003e. It can also be used with equivalent or stronger plywood roof decking.\u003c\/p\u003e\n\u003cp\u003eDo not attach it to damaged, rotten or badly delaminated roof sheathing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eCan I install it anywhere on the roof deck?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003e\u003cstrong\u003eAlmost.\u003c\/strong\u003e You do not need to find a truss, but all four screws must enter solid roof decking. Avoid unsupported sheathing edges, gaps between sheets, damaged decking, vents and other roof penetrations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eWhat's the difference between the KFLK-44S and KFLK-42S?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eThe difference is how they attach to the roof:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKFLK-44S:\u003c\/strong\u003e Four 1\/4-inch × 2-inch screws attach directly to suitable roof decking. It does not normally need to land on a truss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKFLK-42S:\u003c\/strong\u003e Two 5\/16-inch × 4-inch lag bolts are intended to fasten into a truss, rafter or other structural roof member.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eChoose the KFLK-44S when you want more freedom to position the mounts. Choose the KFLK-42S when the plans, engineer or local inspector specifically requires attachment to structural framing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eCan I mix this with the truss-mounted version?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e The KFLK-44S deck-mount and KFLK-42S truss-mount versions can be used together in the same solar array.\u003c\/p\u003e\n\u003cp\u003eFor example, you can use KFLK-42S mounts where the rail crosses a convenient truss and use KFLK-44S mounts where the required attachment location falls between trusses. Both versions provide the same K-Flash mounting surface for the L-bracket, so the rail installs at the same height.\u003c\/p\u003e\n\u003cp\u003eKeep the mount spacing within the allowable rail span for your local snow and wind loads, regardless of which attachment version is used at each location.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n  \n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eCan I space the mounts 48 inches apart?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003e\u003cstrong\u003eYes, the KFLK-44S can be positioned at 48-inch centres.\u003c\/strong\u003e However, the rail must also be rated to span 48 inches under the snow and wind loads at your location.\u003c\/p\u003e\n\u003cp\u003eMount spacing is measured along the rail. Do not exceed the maximum permitted span for the rail and local conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eDo I need to use all four screws?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e The KFLK-44S is supplied as a four-screw deck-mount attachment. Use all four screws in the designated baseplate holes so the load is properly distributed across the roof deck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eDoes it require roof sealant?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003e\u003cstrong\u003eYes, sealant is recommended as part of the K-Flash installation.\u003c\/strong\u003e Apply compatible roofing sealant beneath the flashing in the raised stamped channel surrounding the attachment area.\u003c\/p\u003e\n\u003cp\u003eThe flashing directs water around the mount, while the sealant provides a second layer of protection around the screw penetrations. Follow Kinetic's current installation instructions when applying it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eWhy is the flashing installed underneath the shingles?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eInstalling the flashing beneath the upper shingles allows rainwater to flow over the flashing and continue down the roof. Water is directed around the screw penetrations instead of collecting against them.\u003c\/p\u003e\n\u003cp\u003eThis is more reliable than simply drilling through the shingles and covering the exposed fasteners with caulking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eCan it be installed on an existing shingle roof?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e Carefully lift the shingles above the mounting location, fasten the baseplate to the roof deck, and slide the flashing beneath the upper shingles.\u003c\/p\u003e\n\u003cp\u003eReplace any cracked, brittle or damaged shingles before installing the mount. The flashing should sit flat and allow water to drain naturally down the roof.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eDo I need an L-bracket?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e The KFLK-44S attaches to the roof, but an L-bracket is still required to connect the roof mount to the solar rail.\u003c\/p\u003e\n\u003cp\u003eThe KLB3-M L-Bracket Kit is the matching option we recommend for Rapid-1 rail.\u003c\/p\u003e\n\u003cdiv class=\"sapphire-cta-group\"\u003e\n\u003ca rel=\"noopener\" title=\"KLB3-M L-Bracket Kit\" href=\"\/products\/klb3-m-3-l-bracket-kit\" class=\"sapphire-cta\" target=\"_blank\"\u003eShop KLB3-M L-Bracket Kit\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eWill it work with Rapid-1 rail?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e Install the KLB3-M L-Bracket on the threaded stud above the flashing, then attach the Rapid-1 rail to the L-bracket using the included rail hardware.\u003c\/p\u003e\n\u003cdiv class=\"sapphire-cta-group\"\u003e\n\u003ca rel=\"noopener\" title=\"Rapid-1 Rail\" href=\"\/products\/rapid-1-rail-140-clear-anodized\" class=\"sapphire-cta\" target=\"_blank\"\u003eShop Rapid-1 Rail\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kinetic Solar","offers":[{"title":"Default Title","offer_id":55121597432127,"sku":"KIN-4006","price":16.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/6803\/8463\/files\/Kinetic_KLB3-M_bracket_installed_roof_1600px_3_1__1600px.webp?v=1785814153","url":"https:\/\/sapphirebattery.ca\/products\/kinetic-k-flash-premium-roof-mount-kflk-44s","provider":"Sapphire Energy","version":"1.0","type":"link"}