{"product_id":"4-hole-open-45-degree-strut-corner-angle-galvanized","title":"4-Hole Open 45° Strut Corner Angle","description":"\u003cdiv class=\"sapphire-product-description\"\u003e\n\u003ch2 class=\"sapphire-title\"\u003e4-Hole Open 45° Strut Corner Angle\u003c\/h2\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cp class=\"sapphire-p\"\u003eBuild substantial angled connections with two mounting points on each side of the joint. This heavy formed-steel fitting creates an open 45-degree transition for diagonal braces, sloped supports and larger strut-channel structures.\u003c\/p\u003e\n\n\u003cp class=\"sapphire-p\"\u003eThe longer legs and four-hole design provide more attachment area than a compact two-hole fitting. Made from \u003cstrong\u003e1\/4″ thick steel\u003c\/strong\u003e with a \u003cstrong\u003eHot Dip Galvanized finish\u003c\/strong\u003e, it is ready for demanding indoor or outdoor installations.\u003c\/p\u003e\n\n\u003ch3 class=\"sapphire-title\"\u003eWhy You’ll Love It\u003c\/h3\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cul class=\"sapphire-checklist\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-point attachment\u003c\/strong\u003e — two mounting holes on each formed leg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonger connection area\u003c\/strong\u003e — ideal for larger braces, frames and supports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy 1\/4″ steel\u003c\/strong\u003e — a substantial fitting for dependable assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor or outdoor versatility\u003c\/strong\u003e — Hot Dip Galvanized for durable corrosion protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"sapphire-callout sapphire-callout-blue\"\u003e\n\u003cdiv class=\"sapphire-callout-title\"\u003e2-Hole or 4-Hole Angle?\u003c\/div\u003e\n\n\u003cp class=\"callout-p\"\u003eChoose this 4-hole angle when you want longer legs, two fasteners on each side of the joint and a more substantial connection across the completed assembly.\u003c\/p\u003e\n\n\u003cp class=\"callout-p\"\u003eFor lighter structures or locations where mounting space is limited, our compact 2-hole open 45° angle provides the same angled configuration with one mounting point on each leg.\u003c\/p\u003e\n\n\u003cdiv class=\"sapphire-cta-group\"\u003e\n\u003ca href=\"\/products\/2-hole-open-45-degree-strut-corner-angle-galvanized\" class=\"sapphire-cta\" target=\"_blank\"\u003eShop 2-Hole 45° Angle\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch3 class=\"sapphire-title\"\u003eMore Attachment for Angled Supports\u003c\/h3\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cp class=\"sapphire-p\"\u003eThe formed shape provides two long mounting surfaces set at an open angle. Two holes secure the base leg, while two more connect the inclined leg to the adjoining channel, bracket or mounting surface.\u003c\/p\u003e\n\n\u003cp class=\"sapphire-p\"\u003eThis four-point layout helps maintain alignment across the angled joint and distributes the connection across a larger area. It is a practical choice for diagonal braces, sloped frames and supports where a compact two-hole fitting does not provide enough attachment length.\u003c\/p\u003e\n\n\u003ch3 class=\"sapphire-title\"\u003eDurability for Any Installation\u003c\/h3\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cp class=\"sapphire-p\"\u003eHot dip galvanizing surrounds the fabricated steel fitting with a heavy, bonded zinc coating. This provides excellent protection against moisture and corrosion while preserving the strength of the underlying 1\/4″ steel.\u003c\/p\u003e\n\n\u003cp class=\"sapphire-p\"\u003eIt is an excellent choice for outdoor equipment and exposed structures, but it is equally useful in workshops, equipment rooms, warehouses and utility spaces where long service life and minimal maintenance are priorities.\u003c\/p\u003e\n\n\u003ch3 class=\"sapphire-title\"\u003eSpecifications\u003c\/h3\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003ctable class=\"sapphire-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFormed strut corner angle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAngle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOpen 45-degree configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3-1\/2″ L × 1-5\/8″ W × 3-11\/16″ H\u003cbr\u003e(88.9 × 41.3 × 93.7 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSteel Thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/4″ (6.35 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHole Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9\/16″ (14.3 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended Fastener Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/8″ or 1\/2″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCarbon steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot Dip Galvanized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.76 lb (345 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3 class=\"sapphire-title\"\u003eSuggested Uses\u003c\/h3\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cul class=\"sapphire-checklist\"\u003e\n\u003cli\u003eDiagonal braces and frame reinforcement\u003c\/li\u003e\n\u003cli\u003eSloped strut-channel supports\u003c\/li\u003e\n\u003cli\u003eSolar and electrical equipment structures\u003c\/li\u003e\n\u003cli\u003ePipe, conduit and cable-support systems\u003c\/li\u003e\n\u003cli\u003eWorkshop, warehouse and utility installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 class=\"sapphire-title\"\u003eFrequently Asked\u003c\/h3\u003e\n\u003chr class=\"sapphire-hr\"\u003e\n\n\u003cdiv class=\"sapphire-faq\"\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eWhat does “open 45°” mean?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eIt describes the formed angle of the fitting and the directional change it creates between the connected components. Rather than making a square 90-degree corner, it provides an open angled connection for braces, sloped supports and similar structures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eWhy choose the 4-hole version?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eThe four-hole angle has longer mounting legs and provides two attachment points on each side of the joint. This gives you more connection area and makes it a good choice for larger frames, braces and supports.\u003c\/p\u003e\n\n\u003cp\u003eThe compact two-hole version is a great option when space is limited or the additional mounting length is not needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eWhen should I use this instead of a 90° corner angle?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eChoose this fitting when one section of channel or support needs to run diagonally or at an open angle from the other. It is useful for braces, sloped frames and supports that transition gradually between mounting points.\u003c\/p\u003e\n\n\u003cp\u003eChoose a 90° corner angle when the two channels or mounting surfaces are perpendicular and you need a square right-angle connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eCan I use this angle indoors?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eAbsolutely. It is well suited to workshops, equipment rooms, warehouses and indoor utility structures. The Hot Dip Galvanized coating also adds protection in locations that may experience humidity, condensation or occasional moisture.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eIs it suitable for outdoor installations?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eYes. The Hot Dip Galvanized finish provides durable corrosion protection for outdoor, damp and exposed installations. For the best complete assembly, use channel, strut nuts, bolts and adjoining fittings selected for the same environment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eDo I need washers when installing the angle?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eYes. This fitting works best with 3\/8″ or 1\/2″ bolts installed using heavy-duty flat washers. The washers provide a broad bearing surface beneath the bolt heads, distribute clamping force across the fitting and properly cover the 9\/16″ mounting holes.\u003c\/p\u003e\n\n\u003cp\u003eWashers are especially important when using 3\/8″ bolts because of the additional clearance around the smaller fastener. Select the bolt length and other hardware to suit your strut channel, spring nuts and completed assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"sapphire-faq-item\"\u003e\n\u003csummary\u003eShould I use all four mounting holes?\u003c\/summary\u003e\n\u003cdiv class=\"sapphire-faq-body\"\u003e\n\u003cp\u003eYes. The angle is designed to be secured at all four mounting points, with two fasteners on each leg. Using every hole provides the intended alignment and distributes the connection across the full fitting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":67580461056319,"sku":"L2265-00000HD","price":7.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/6803\/8463\/files\/L2265_4hole_open_45_bracket_render_1200px.webp?v=1790386175","url":"https:\/\/sapphirebattery.ca\/products\/4-hole-open-45-degree-strut-corner-angle-galvanized","provider":"Sapphire Energy","version":"1.0","type":"link"}